How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
The video above shows you how to add oil to your 1990 Honda CRX. Before adding oil to your CRX, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your CRX has a low oil level. For most Hondas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your CRX, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your CRX and how to add oil. Adding too much oil to your CRX can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your CRX, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.