How to Add Oil: 1990 Volvo 740 GL 2.3L 4 Cyl. Sedan
Volvo 740 Model Years - 1990, 1991, 1992
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw
Learn where your air filter is located and how to determine if it needs to be changed.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
- Lake Ford helped make these videos
- Feedback
- Download Volvo owners manuals
The video above shows you how to add oil to your 1990 Volvo 740. Before adding oil to your 740, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 740 has a low oil level. For most Volvos, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your 740, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your 740 and how to add oil. Adding too much oil to your 740 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your 740, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
