Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 1998 Jeep Grand Cherokee. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Grand Cherokee's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Grand Cherokee is relatively easy - turn your hazard lights on and check the front of your Grand Cherokee and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Grand Cherokee, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.
There's no reason to check the washer fluid level without adding some - see how to do it here!1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.
Coolant hoses wear out over time and need to be replaced - check 'em early and often1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs1998 Jeep Grand Cherokee TSi 4.0L 6 Cyl.