We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to change the oil and oil filter in your 1999 Chevrolet Blazer. When you change your own oil, you know that you are putting quality oil in your Blazer and that the filter is being changed too. Most importantly, you get a chance to look around under your Blazer for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Blazer. For most Chevrolets, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Chevrolet Blazer oil filter wrench. If your Blazer is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Blazer.
Most Chevrolets have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Blazer. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
If your transmission is running low on fluid, be sure to add some - find out how to do this here!1995 Chevrolet Blazer LT 4.3L V6 (4 Door)
Did you know that heat is worse for your battery than cold? Replace it every 4 years1995 Chevrolet Blazer LT 4.3L V6 (4 Door)
Got a short fuse? Don't blow a fuse, change it!1999 Chevrolet Blazer LS 4.3L V6 (4 Door)
Harsh downshifts? Slipping gears? You might be low on transmission fluid1995 Chevrolet Blazer LT 4.3L V6 (4 Door)