How To Open Hood: 2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)

Jeep Cherokee Model Years - 1997, 1998, 1999, 2000, 2001

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1999 Jeep Grand Cherokee Limited 4.0L 6 Cyl. Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

1999 Jeep Grand Cherokee Limited 4.0L 6 Cyl. Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door) Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door) Lights Center Brake Light (replace bulb)

Don't be the guy with your third brake light burnt out

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2000 Jeep Cherokee. Popping the hood, or bonnet, on your Cherokee is a two step process, you need to release the hood latch inside your Cherokee and then you need to release the safety latch under your hood in the front of your Cherokee. The video above shows you the location of both hood latches.

Sometimes, the hood on Jeeps gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Cherokee, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Cherokee with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Cherokees, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2000 Jeep Cherokee is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20