We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2000 Oldsmobile Alero. We recommend that you change both the driver and passenger side bulbs at the same time on your Alero as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Alero's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Alero and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Alero, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)
Coolant hoses wear out over time and need to be replaced - check 'em early and often2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)
If you have an electrical component that doesn't work, try replacing the fuse first2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)
Harsh downshifts? Slipping gears? You might be low on transmission fluid2000 Oldsmobile Alero GL 3.4L V6 Sedan (4 Door)