How to Add Oil: 2000 Toyota MR2 Spyder 1.8L 4 Cyl.
Toyota MR2 Spyder Model Years - 2000, 2001, 2002, 2003, 2004, 2005
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Help keep your car as responsive as you are by maintaining proper power steering fluid levels
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb
Where is the jack location, jack points and other tips on jacking up a vehicle
- Lake Chevy helped make these videos
- Feedback
- Download Toyota owners manuals
The video above shows you how to add oil to your 2000 Toyota MR2 Spyder. Before adding oil to your MR2 Spyder, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your MR2 Spyder has a low oil level. For most Toyotas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your MR2 Spyder, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your MR2 Spyder and how to add oil. Adding too much oil to your MR2 Spyder can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your MR2 Spyder, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
