We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2001 Chevrolet Impala. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Impala's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Impala is relatively easy - turn your hazard lights on and check the front of your Impala and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Impala, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2001 Chevrolet Impala 3.4L V6
If you have an electrical component that doesn't work, try replacing the fuse first2001 Chevrolet Impala 3.4L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2001 Chevrolet Impala 3.4L V6
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2001 Chevrolet Impala 3.4L V6
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2001 Chevrolet Impala 3.4L V6
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2001 Chevrolet Impala 3.4L V6