We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to open the hood in your 2002 Ford Windstar. Popping the hood on your Windstar is a two step process, you need to release the hood latch inside your Windstar and then you need to release the safety latch under your hood in the front of your Windstar. The video above shows you the location of both hood latches. Sometimes, the hood on Fords gets stuck and won't pop up after the interior latch is released. If this occurs on your Windstar, simply pull up on the hood and it should pop up for you to release the second latch. Sometimes, especially on older Windstars, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2002 Ford Windstar is probably stuck in the "open" position - push the release lever back and forth several times and then try to close your hood.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2002 Ford Windstar SEL 3.8L V6
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2002 Ford Windstar SEL 3.8L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2002 Ford Windstar SEL 3.8L V6
Got a short fuse? Don't blow a fuse, change it!2002 Ford Windstar SEL 3.8L V6
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2002 Ford Windstar SEL 3.8L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2002 Ford Windstar SEL 3.8L V6