We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2002 GMC Yukon XL 2500. We recommend that you change both the driver and passenger side bulbs at the same time on your Yukon XL 2500 as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Yukon XL 2500's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Yukon XL 2500 and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Yukon XL 2500, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2002 GMC Yukon XL 2500 SLT 8.1L V8
Harsh downshifts? Slipping gears? You might be low on transmission fluid2002 GMC Yukon XL 2500 SLT 8.1L V8
There's no reason to check the washer fluid level without adding some - see how to do it here!2002 GMC Yukon XL 2500 SLT 8.1L V8
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2002 GMC Yukon XL 2500 SLT 8.1L V8
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2002 GMC Yukon XL 2500 SLT 8.1L V8
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2002 GMC Yukon XL 2500 SLT 8.1L V8