We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2003 Jeep Grand Cherokee. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Grand Cherokee's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Grand Cherokee is relatively easy - turn your hazard lights on and check the front of your Grand Cherokee and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Grand Cherokee, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.
See how to seal up minor power steering fluid leaks2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.
Because you have to start somewhere2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.
Animals love the sweet smell of antifreeze, too bad it's toxic! Fix your minor leaks2003 Jeep Grand Cherokee Laredo 4.0L 6 Cyl.