How to Add Oil: 2004 Acura TL 3.2L V6
Acura TL Model Years - 2004, 2005, 2006, 2007, 2008
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
Help keep your car as responsive as you are by maintaining proper power steering fluid levels
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too
- Lake Ford helped make these videos
- Feedback
- Download Acura owners manuals
The video above shows you how to add oil to your 2004 Acura TL. Before adding oil to your TL, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your TL has a low oil level. For most Acuras, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your TL, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your TL and how to add oil. Adding too much oil to your TL can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your TL, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
