Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The brake lights on your 2004 Chrysler Pacifica illuminate when you hit the brake pedal and help prevent you from being rear ended by the cars behind you. Brake light bulbs grow dimmer over time and eventually burn out. This video shows you how to change the brake lights on your 2004 Chrysler Pacifica. When you replace the brake light bulb on your Pacifica, be careful not to touch the bulb directly with your fingers - the oil from your skin will cause the area that you touched to burn hotter than the rest of the bulb, which causes the bulb to burn out quicker.
If you are going to replace a bulb in your cluster, it is a good idea to replace all of them. Not only will the lights on your Pacifica be brighter, you decrease the likelihood you will need to change any of the bulbs again in the near future. A burnt out bulb in the taillight cluster of your Pacifica is an excuse for a police officer to pull you over. Check your bulbs frequently and change burnt bulbs promptly.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2004 Chrysler Pacifica 3.5L V6
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2004 Chrysler Pacifica 3.5L V6
Because you have to start somewhere2004 Chrysler Pacifica 3.5L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2004 Chrysler Pacifica 3.5L V6
If you have an electrical component that doesn't work, try replacing the fuse first2004 Chrysler Pacifica 3.5L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2004 Chrysler Pacifica 3.5L V6