David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2004 Chrysler Pacifica. We recommend that you change both the driver and passenger side bulbs at the same time on your Pacifica as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Pacifica's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Pacifica and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Pacifica, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2004 Chrysler Pacifica 3.5L V6
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2004 Chrysler Pacifica 3.5L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2004 Chrysler Pacifica 3.5L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2004 Chrysler Pacifica 3.5L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2004 Chrysler Pacifica 3.5L V6
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2004 Chrysler Pacifica 3.5L V6