Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2005 Chrysler 300. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 300's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 300 is relatively easy - turn your hazard lights on and check the front of your 300 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 300, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Animals love the sweet smell of antifreeze, too bad it's toxic! Fix your minor leaks2005 Chrysler 300 C 5.7L V8
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2005 Chrysler 300 C 5.7L V8
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2005 Chrysler 300 C 5.7L V8
Did you know that heat is worse for your battery than cold? Replace it every 4 years2005 Chrysler 300 C 5.7L V8
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2005 Chrysler 300 C 5.7L V8
If you have an electrical component that doesn't work, try replacing the fuse first2005 Chrysler 300 C 5.7L V8