David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2005 Chrysler 300. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your 300 is low, you need to add fluid through the dipstick tube. Chrysler has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your 300, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your 300, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2005 Chrysler 300 C 5.7L V8
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2005 Chrysler 300 C 5.7L V8
White light when you back up - yup, they burn out and you can replace them with bright LEDs2005 Chrysler 300 C 5.7L V8
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2005 Chrysler 300 C 5.7L V8
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2005 Chrysler 300 C 5.7L V8
If you have an electrical component that doesn't work, try replacing the fuse first2005 Chrysler 300 C 5.7L V8