Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2005 Chrysler 300 should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your 300 and how to check the transmission fluid level. If the transmission fluid level in your 300 is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your 300, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your 300, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2005 Chrysler 300 C 5.7L V8
Got a short fuse? Don't blow a fuse, change it!2005 Chrysler 300 C 5.7L V8
See how to seal up minor power steering fluid leaks2005 Chrysler 300 C 5.7L V8
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2005 Chrysler 300 C 5.7L V8
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2005 Chrysler 300 C 5.7L V8
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2005 Chrysler 300 C 5.7L V8