We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2005 Mercury Montego. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Montego is low, you need to add fluid through the dipstick tube. Mercury has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Montego, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Montego, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
A few key tips will make jacking up your car much safer2005 Ford Five Hundred SEL 3.0L V6
Learn where your air filter is located and how to determine if it needs to be changed.2005 Ford Five Hundred SEL 3.0L V6
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2005 Ford Five Hundred SEL 3.0L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2005 Ford Five Hundred SEL 3.0L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2005 Ford Five Hundred SEL 3.0L V6
Because you have to start somewhere2005 Ford Five Hundred SEL 3.0L V6