We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2006 Chrysler Town and Country. We recommend that you change both the driver and passenger side bulbs at the same time on your Town and Country as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Town and Country's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Town and Country and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Town and Country, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If you have an electrical component that doesn't work, try replacing the fuse first2007 Dodge Grand Caravan SXT 3.8L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2007 Dodge Grand Caravan SXT 3.8L V6
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2007 Dodge Grand Caravan SXT 3.8L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2007 Dodge Grand Caravan SXT 3.8L V6
Because you have to start somewhere2007 Dodge Grand Caravan SXT 3.8L V6
Want an easy way to save $500? Rotate your tires at least three times per year2007 Dodge Grand Caravan SXT 3.8L V6