EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Oil & Filter Change Ford Fusion (2006-2009)

David Hobbs helped make these videos

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

This video shows you how to change the oil and oil filter in your 2006 Ford Fusion. When you change your own oil, you know that you are putting quality oil in your Fusion and that the filter is being changed too. Most importantly, you get a chance to look around under your Fusion for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Fusion. For most Fords, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Ford Fusion oil filter wrench. If your Fusion is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Fusion.

Most Fords have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Fusion. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.

Other videos you might find helpful

  • 2006-2009 Ford Fusion: Fix Oil Leaks
    Fix minor oil leaks

    Learn how to diagnose and fix minor oil leaks in your car

    2006 Ford Fusion SE 3.0L V6
  • Fix Transmission Fluid Leaks Ford Fusion (2006-2009)
    Dealing with minor transmission fluid leaks

    Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

    2006 Ford Fusion SE 3.0L V6
  • Rear Turn Signal Replacement Ford Fusion (2006-2009)
    Change a rear blinker

    Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

    2006 Ford Fusion SE 3.0L V6
  • Check Oil Level 2006-2009 Ford Fusion
    Oil level check

    Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

    2006 Ford Fusion SE 3.0L V6
  • Fix a Flat Tire: Ford Fusion (2006-2009)
    Change a flat tire

    Learn where your spare tire and jack are located before you need it on the side of the road

    2006 Ford Fusion SE 3.0L V6
  • Brake Light Change 2006-2009 Ford Fusion
    Replace brake lights

    Burnt out brake lights increase your chance of getting rear ended - check and change yours today

    2006 Ford Fusion SE 3.0L V6
  • See all videos for the 2006 Ford Fusion
Comments
The Right Parts
The Right Tools