We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2006 Ford Fusion should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Fusion and how to check the transmission fluid level. If the transmission fluid level in your Fusion is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Fusion, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2006 Ford Fusion SE 3.0L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2006 Ford Fusion SE 3.0L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2006 Ford Fusion SE 3.0L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2006 Ford Fusion SE 3.0L V6
Because you have to start somewhere2006 Ford Fusion SE 3.0L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Ford Fusion SE 3.0L V6