Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2006 Mazda 6 should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your 6 and how to check the transmission fluid level. If the transmission fluid level in your 6 is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your 6, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your 6, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Because you have to start somewhere2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
There's no reason to check the washer fluid level without adding some - see how to do it here!2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)