How to Add Oil: 2006 Subaru B9 Tribeca 3.0L 6 Cyl.
Subaru B9 Tribeca Model Years - 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw
- BMW of MKE North helped make these videos
- Feedback
- Download Subaru owners manuals
The video above shows you how to add oil to your 2006 Subaru B9 Tribeca. Before adding oil to your B9 Tribeca, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your B9 Tribeca has a low oil level. For most Subarus, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your B9 Tribeca, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your B9 Tribeca and how to add oil. Adding too much oil to your B9 Tribeca can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your B9 Tribeca, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
