David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2007 Chevrolet Cobalt. We recommend that you change both the driver and passenger side bulbs at the same time on your Cobalt as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Cobalt's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Cobalt and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Cobalt, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Learn where your spare tire and jack are located before you need it on the side of the road2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)
There's no reason to check the washer fluid level without adding some - see how to do it here!2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)
The burnt out tail light: classic reason for a cop to pull you over - change yours now2010 Chevrolet Cobalt LT 2.2L 4 Cyl. Sedan (4 Door)