Intl. BMW helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2007 Chevrolet Uplander. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Uplander's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Uplander is relatively easy - turn your hazard lights on and check the front of your Uplander and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Uplander, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Low coolant levels is all to common - top yours up today2008 Chevrolet Uplander LS 3.9L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2008 Chevrolet Uplander LS 3.9L V6
The burnt out tail light: classic reason for a cop to pull you over - change yours now2008 Chevrolet Uplander LS 3.9L V6
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2008 Chevrolet Uplander LS 3.9L V6
If you have an electrical component that doesn't work, try replacing the fuse first2008 Chevrolet Uplander LS 3.9L V6
A few key tips will make jacking up your car much safer2008 Chevrolet Uplander LS 3.9L V6