EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

How to Jumpstart a 2007-2010 Chrysler Sebring

Braeger Chevy helped make these videos

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

This video shows you how to jump start a dead battery in your 2007 Chrysler Sebring. If you get into your Sebring, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Sebring. Once you are finished reviving a dead car battery in your Sebring, make sure you drive it for at least 5 minutes before turning it off so your battery isn't dead the next time.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Sebring regularly and simply forgot to turn your lights off.

Other videos you might find helpful

  • Fix Antifreeze Leaks: 2007-2010 Chrysler Sebring
    Try this cheap fix for leaks

    Animals love the sweet smell of antifreeze, too bad it's toxic! Fix your minor leaks

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • How to Clean Battery Corrosion: 2007-2010 Chrysler Sebring
    Clean the gunk off of your battery

    If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • Coolant Flush How-to: Chrysler Sebring (2007-2010)
    Coolant flush

    Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • Parking Light Change 2007-2010 Chrysler Sebring
    Change the parking light

    Small bulbs that burn out regularly - did you know you can replace these with LED lights?

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • Highbeam (Brights) Change: 2007-2010 Chrysler Sebring
    Replace brights

    On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • Follow These Steps to Add Power Steering Fluid to a Chrysler Sebring (2007-2010)
    Top up power steering fluid

    Help keep your car as responsive as you are by maintaining proper power steering fluid levels

    2007 Chrysler Sebring Limited 2.4L 4 Cyl.
  • See all videos for the 2007 Chrysler Sebring
Comments
The Right Parts
The Right Tools
batteries battery chargers terminal clamps safety glasses stop leak battery terminal cleaners tires gloves