Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to change the oil and oil filter in your 2007 Ford Fusion. When you change your own oil, you know that you are putting quality oil in your Fusion and that the filter is being changed too. Most importantly, you get a chance to look around under your Fusion for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Fusion. For most Fords, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Ford Fusion oil filter wrench. If your Fusion is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Fusion.
Most Fords have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Fusion. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2006 Ford Fusion SE 3.0L V6
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2006 Ford Fusion SE 3.0L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2006 Ford Fusion SE 3.0L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2006 Ford Fusion SE 3.0L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Ford Fusion SE 3.0L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2006 Ford Fusion SE 3.0L V6