EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Oil & Filter Change Chrysler Town and Country (2008-2013)

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

This video shows you how to change the oil and oil filter in your 2008 Chrysler Town and Country. When you change your own oil, you know that you are putting quality oil in your Town and Country and that the filter is being changed too. Most importantly, you get a chance to look around under your Town and Country for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Town and Country. For most Chryslers, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Chrysler Town and Country oil filter wrench. If your Town and Country is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Town and Country.

Most Chryslers have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Town and Country. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.

Other videos you might find helpful

  • Engine Light Is On: 2008-2013 Chrysler Town and Country - What to Do
    Do not ignore this!

    A check engine light can be cleared with a simple fix or it could be a major problem - find out now!

    2008 Chrysler Town and Country Touring 3.8L V6
  • Reverse Light Replacement 2008-2013 Chrysler Town and Country
    Replace reverse light

    White light when you back up - yup, they burn out and you can replace them with bright LEDs

    2008 Chrysler Town and Country Touring 3.8L V6
  • Brake Light Change 2008-2013 Chrysler Town and Country
    Replace brake lights

    Burnt out brake lights increase your chance of getting rear ended - check and change yours today

    2008 Chrysler Town and Country Touring 3.8L V6
  • Open Hood How To 2008-2013 Chrysler Town and Country
    How to open the hood

    Because you have to start somewhere

    2008 Chrysler Town and Country Touring 3.8L V6
  • Rear Turn Signal Replacement Chrysler Town and Country (2008-2013)
    Change a rear blinker

    Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

    2008 Chrysler Town and Country Touring 3.8L V6
  • Check the Belts: 2008-2013 Chrysler Town and Country
    Check the belts

    Unlike a waist belt, these usually become looser as they age! Learn how to check it here

    2008 Chrysler Town and Country Touring 3.8L V6
  • See all videos for the 2008 Chrysler Town and Country
Comments
The Right Parts
The Right Tools