David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
In the video above, we show you how to fix minor oil leaks in your 2008 GMC Yukon. We will show you specifically how to determine if the fluid leaking from your Yukon is oil, check your oil level and fix the oil leak using stop leak. Extremely low oil levels can critically damage your engine, so it is important to be proactive about oil leaks, however small. Oil leaks in the 2008 Yukons with the 6.2 liter engine are often due to a bad seal in the drain plug - the metal washer in your drain plug can only be tightened a few times before it loses its ability to seal and should be replaced periodically to prevent leaking. Replacing the metal washer should only be done when you change the oil in your Yukon, fortunately the video above shows how to fix the minor leak in the interim.
Fixing minor oil leaks is fairly straightforward, but first, make sure that your engine is cold and that your Yukon is parked on a level surface when you check the oil level as both of these things can cause the oil level to read low. Check our What is Leaking? video to see what type of fluid is leaking from your Yukon if you are unsure.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2008 GMC Yukon Denali 6.2L V8
Because you have to start somewhere2008 GMC Yukon Denali 6.2L V8
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2008 GMC Yukon Denali 6.2L V8
Did you know that heat is worse for your battery than cold? Replace it every 4 years2008 GMC Yukon Denali 6.2L V8
Learn where your spare tire and jack are located before you need it on the side of the road2008 GMC Yukon Denali 6.2L V8
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 GMC Yukon Denali 6.2L V8