How To Open Hood: 2008 Toyota Tundra SR5 4.7L V8 Crew Cab Pickup

Toyota Tundra Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2008 Toyota Tundra SR5 4.7L V8 Crew Cab Pickup Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2008 Toyota Tundra SR5 4.7L V8 Crew Cab Pickup Fuse (Interior) Replace

Got a short fuse? Don't blow a fuse, change it!

2008 Toyota Tundra SR5 4.7L V8 Crew Cab Pickup Lights Headlight (replace bulb)

Avoid tickets and accidents with both working headlights! New bulbs are much brighter too

2008 Toyota Tundra SR5 4.7L V8 Crew Cab Pickup Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2008 Toyota Tundra. Popping the hood, or bonnet, on your Tundra is a two step process, you need to release the hood latch inside your Tundra and then you need to release the safety latch under your hood in the front of your Tundra. The video above shows you the location of both hood latches.

Sometimes, the hood on Toyotas gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Tundra, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Tundra with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Tundras, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2008 Toyota Tundra is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20