We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2009 Chevrolet Traverse. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Traverse's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Traverse is relatively easy - turn your hazard lights on and check the front of your Traverse and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Traverse, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Got a short fuse? Don't blow a fuse, change it!2009 Chevrolet Traverse LT 3.6L V6
Because you have to start somewhere2009 Chevrolet Traverse LT 3.6L V6
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!2009 Chevrolet Traverse LT 3.6L V6
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2009 Chevrolet Traverse LT 3.6L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2009 Chevrolet Traverse LT 3.6L V6
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2009 Chevrolet Traverse LT 3.6L V6