How To Open Hood: 2010 Chrysler Town and Country Touring 3.8L V6

Chrysler Town and Country Model Years - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2008 Chrysler Town and Country Touring 3.8L V6 Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

2008 Chrysler Town and Country Touring 3.8L V6 Brake Fluid Add Fluid

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

2008 Chrysler Town and Country Touring 3.8L V6 Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle

2008 Chrysler Town and Country Touring 3.8L V6 Power Steering Fluid Fix Leaks

If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2010 Chrysler Town and Country. Popping the hood, or bonnet, on your Town and Country is a two step process, you need to release the hood latch inside your Town and Country and then you need to release the safety latch under your hood in the front of your Town and Country. The video above shows you the location of both hood latches.

Sometimes, the hood on Chryslers gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Town and Country, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Town and Country with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Town and Countrys, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2010 Chrysler Town and Country is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20