We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to open the hood in your 2010 Dodge Journey. Popping the hood on your Journey is a two step process, you need to release the hood latch inside your Journey and then you need to release the safety latch under your hood in the front of your Journey. The video above shows you the location of both hood latches. Sometimes, the hood on Dodges gets stuck and won't pop up after the interior latch is released. If this occurs on your Journey, simply pull up on the hood and it should pop up for you to release the second latch. Sometimes, especially on older Journeys, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2010 Dodge Journey is probably stuck in the "open" position - push the release lever back and forth several times and then try to close your hood.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2010 Dodge Journey SXT 3.5L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2010 Dodge Journey SXT 3.5L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Dodge Journey SXT 3.5L V6
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2010 Dodge Journey SXT 3.5L V6
Learn where your air filter is located and how to determine if it needs to be changed.2010 Dodge Journey SXT 3.5L V6
If you have an electrical component that doesn't work, try replacing the fuse first2010 Dodge Journey SXT 3.5L V6