We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 Dodge Journey. We recommend that you change both the driver and passenger side bulbs at the same time on your Journey as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Journey's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Journey and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Journey, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Learn where your spare tire and jack are located before you need it on the side of the road2010 Dodge Journey SXT 3.5L V6
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2010 Dodge Journey SXT 3.5L V6
A few key tips will make jacking up your car much safer2010 Dodge Journey SXT 3.5L V6
Is the clock in your car ahead or behind? Learn how to set it here!2010 Dodge Journey SXT 3.5L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2010 Dodge Journey SXT 3.5L V6
Because you have to start somewhere2010 Dodge Journey SXT 3.5L V6