How to Add Oil: 2010 Ford Edge SEL 3.5L V6
Ford Edge Model Years - 2007, 2008, 2009, 2010
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
The burnt out tail light: classic reason for a cop to pull you over - change yours now
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb
- Honda City helped make these videos
- Feedback
- Download Ford owners manuals
The video above shows you how to add oil to your 2010 Ford Edge. Before adding oil to your Edge, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Edge has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Edge, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Edge and how to add oil. Adding too much oil to your Edge can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Edge, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
