EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Air Filter How-To: 2010-2012 Ford Fusion

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

The engine air filter in your 2010 Ford Fusion cleans the air that enters your engine. You should change the filter on your Fusion at least once a year or every 20,000 miles, whichever comes first. If you drive in dusty or sandy conditions, you should change your filter more frequently. A dirty air filter will cause your Fusion to lose 1 - 3 mpg, depending on your driving, you can save 70 - 100 gallons of gas per year simply by changing your filter regularly. The video above, shows you where the engine air filter is located in your Fusion and how to change it!

In addition to improving the fuel economy of your Fusion, regularly replacing your air filter will put less strain on your engine. These filters are fairly inexpensive, so check out our parts page for great deals and coupons on a new one (tip: buy several, when you go to check the filter on your Fusion, you can easily swap it for a new one if it is dirty).

Other videos you might find helpful

  • How to Add Oil Ford Fusion (2010-2012)
    Top up the oil level

    Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • How to Jumpstart a 2010-2012 Ford Fusion
    Proper jumpstart procedure

    Learning how to jump your car before you need to is an excellent idea

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • 2010-2012 Ford Fusion Engine Air Filter Check
    Determine if your air filter is dirty

    Learn where your air filter is located and how to determine if it needs to be changed.

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Coolant Level Check: 2010-2012 Fusion
    Be cool under pressure

    Your coolant should perform well under any condition - just like Aaron Rodgers!

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Add Brake Fluid: 2010-2012 Ford Fusion
    Add brake fluid

    If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Fix Transmission Fluid Leaks Ford Fusion (2010-2012)
    Dealing with minor transmission fluid leaks

    Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • See all videos for the 2010 Ford Fusion
Comments
The Right Parts
The Right Tools
engine air filters panel poppers fuel injector cleaner screwdriver bit sets front wiper blades electric screwdrivers floor mats pliers