David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 Ford Fusion. We recommend that you change both the driver and passenger side bulbs at the same time on your Fusion as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Fusion's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Fusion and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Fusion, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Ford Fusion SE 2.5L 4 Cyl.
Learning how to jump your car before you need to is an excellent idea2010 Ford Fusion SE 2.5L 4 Cyl.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2010 Ford Fusion SE 2.5L 4 Cyl.
Your coolant should perform well under any condition - just like Aaron Rodgers!2010 Ford Fusion SE 2.5L 4 Cyl.
Got a short fuse? Don't blow a fuse, change it!2010 Ford Fusion SE 2.5L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2010 Ford Fusion SE 2.5L 4 Cyl.