Check Oil Level 2010 Ford Fusion SE 2.5L 4 Cyl.

Ford Fusion Model Years - 2010, 2011, 2012

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Remove Dipstick - Locate, remove and wipe oil dipstick

4. Read Oil Level - Reinsert dipstick, remove and then read oil level

5. More Info. - Additional information on the oil level

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Checking the oil in a Fusion is fairly easy and should be done once a month. Note that most Ford have an oil pressure gauge next to the speedometer - this gauge does not tell you what your oil level is, but rather uses an oil sensor to indicate the oil pressure in the engine. If you have an oil light illuminate in your Fusion, this means your oil pressure is either high or low. The video above will show you how to check the oil level in your 2010 Ford Fusion by taking an accurate dipstick reading. Make sure your engine is cold when you check the oil in your Fusion. Otherwise the dipstick will read slightly low. In addition to checking the oil level, you also want to look at the condition of the oil when you have the dipstick out. If the oil in your Fusion is dirty or smells like gasoline, you probably need an oil change.

If you notice that the oil level in your Fusion is extremely low or empty, fill it up and check it again the next time you drive. If it is extremely low again, have your mechanic take a look before driving it much more.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2010 Ford Fusion SE 2.5L 4 Cyl. Transmission Fluid Add Fluid

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

2010 Ford Fusion SE 2.5L 4 Cyl. Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2011 Ford Fusion SEL 2.5L 4 Cyl. Clock Set Clock

Is the clock in your car ahead or behind? Learn how to set it here!

2010 Ford Fusion SE 2.5L 4 Cyl. Check Engine Light Diagnose

A check engine light can be cleared with a simple fix or it could be a major problem - find out now!