EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Transmission Fluid Level Check Ford Fusion (2010-2012)

David Hobbs helped make these videos

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

The engine in your 2010 Ford Fusion should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Fusion and how to check the transmission fluid level. If the transmission fluid level in your Fusion is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Fusion, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.

If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.

Other videos you might find helpful

  • Battery Replacement: 2010-2012 Ford Fusion
    Replace your car battery

    Did you know that heat is worse for your battery than cold? Replace it every 4 years

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • 2010-2012 Ford Fusion Brake Fluid Level Check
    Check your brake fluid

    Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Cabin Filter Replacement: Ford Fusion 2010-2012
    Change your cabin air filter!

    Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • 2010-2012 Ford Fusion Engine Air Filter Check
    Determine if your air filter is dirty

    Learn where your air filter is located and how to determine if it needs to be changed.

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Add Windshield Washer Fluid Ford Fusion (2010-2012)
    Add washer fluid

    One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • Rear Turn Signal Replacement Ford Fusion (2010-2012)
    Change a rear blinker

    Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

    2010 Ford Fusion SE 2.5L 4 Cyl.
  • See all videos for the 2010 Ford Fusion
Comments
The Right Parts
The Right Tools