Intl. BMW helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 GMC Terrain. We recommend that you change both the driver and passenger side bulbs at the same time on your Terrain as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Terrain's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Terrain and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Terrain, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2010 GMC Terrain SLT 3.0L V6
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2010 GMC Terrain SLT 3.0L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2010 GMC Terrain SLT 3.0L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 GMC Terrain SLT 3.0L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2010 GMC Terrain SLT 3.0L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2010 GMC Terrain SLT 3.0L V6