We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2010 Lincoln MKZ. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your MKZ at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Lincolns, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Lincolns have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your MKZ has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your MKZ, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
Unlike a waist belt, these usually become looser as they age! Learn how to check it here2010 Lincoln MKZ 3.5L V6
Don't be caught in the fog with burnt out fog light bulbs2010 Lincoln MKZ 3.5L V6
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2010 Lincoln MKZ 3.5L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2010 Lincoln MKZ 3.5L V6
The burnt out tail light: classic reason for a cop to pull you over - change yours now2010 Lincoln MKZ 3.5L V6
Because you have to start somewhere2010 Lincoln MKZ 3.5L V6