How to Add Oil: 2010 Mercury Milan Premier 3.0L V6 FlexFuel
Mercury Milan Model Years - 2006, 2007, 2008, 2009, 2010, 2011
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!
Is the clock in your car ahead or behind? Learn how to set it here!
- Lake Ford helped make these videos
- Feedback
- Download Mercury owners manuals
The video above shows you how to add oil to your 2010 Mercury Milan. Before adding oil to your Milan, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Milan has a low oil level. For most Mercurys, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Milan, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Milan and how to add oil. Adding too much oil to your Milan can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Milan, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
