How To Open Hood: 2010 Mitsubishi Outlander ES 2.4L 4 Cyl.

Mitsubishi Outlander Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2010 Mitsubishi Outlander ES 2.4L 4 Cyl. Power Steering Fluid Fix Leaks

If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak

2010 Mitsubishi Outlander ES 2.4L 4 Cyl. Fuse (Engine) Replace

If you have an electrical component that doesn't work, try replacing the fuse first

2010 Mitsubishi Outlander ES 2.4L 4 Cyl. Oil Check Oil Level

Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

2010 Mitsubishi Outlander ES 2.4L 4 Cyl. Check Engine Light Diagnose

A check engine light can be cleared with a simple fix or it could be a major problem - find out now!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2010 Mitsubishi Outlander. Popping the hood, or bonnet, on your Outlander is a two step process, you need to release the hood latch inside your Outlander and then you need to release the safety latch under your hood in the front of your Outlander. The video above shows you the location of both hood latches.

Sometimes, the hood on Mitsubishis gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Outlander, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Outlander with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Outlanders, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2010 Mitsubishi Outlander is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20