We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to change the oil and oil filter in your 2010 Toyota Corolla. When you change your own oil, you know that you are putting quality oil in your Corolla and that the filter is being changed too. Most importantly, you get a chance to look around under your Corolla for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Corolla. For most Toyotas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Toyota Corolla oil filter wrench. If your Corolla is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Corolla.
Most Toyotas have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Corolla. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
Got a short fuse? Don't blow a fuse, change it!2010 Toyota Corolla S 1.8L 4 Cyl.
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2010 Toyota Corolla S 1.8L 4 Cyl.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2010 Toyota Corolla S 1.8L 4 Cyl.
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2010 Toyota Corolla S 1.8L 4 Cyl.