Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2010 Toyota Prius. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Prius's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Prius is relatively easy - turn your hazard lights on and check the front of your Prius and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Prius, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2010 Toyota Prius 1.8L 4 Cyl.
Is the clock in your car ahead or behind? Learn how to set it here!2010 Toyota Prius 1.8L 4 Cyl.
Because you have to start somewhere2010 Toyota Prius 1.8L 4 Cyl.
Low coolant levels is all to common - top yours up today2010 Toyota Prius 1.8L 4 Cyl.
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2010 Toyota Prius 1.8L 4 Cyl.
A few key tips will make jacking up your car much safer2010 Toyota Prius 1.8L 4 Cyl.