How To Open Hood: 2011 BMW 128i 3.0L 6 Cyl. Coupe

BMW 128i Model Years - 2008, 2009, 2010, 2011, 2012, 2013

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2011 BMW 128i 3.0L 6 Cyl. Coupe Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle

2011 BMW 128i 3.0L 6 Cyl. Coupe Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2011 BMW 128i 3.0L 6 Cyl. Coupe Oil Check Oil Level

Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

2011 BMW 128i 3.0L 6 Cyl. Coupe Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2011 BMW 128i. Popping the hood, or bonnet, on your 128i is a two step process, you need to release the hood latch inside your 128i and then you need to release the safety latch under your hood in the front of your 128i. The video above shows you the location of both hood latches.

Sometimes, the hood on BMWs gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your 128i, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your 128i with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older 128is, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2011 BMW 128i is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20