We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2013 Ford Focus should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Focus and how to check the transmission fluid level. If the transmission fluid level in your Focus is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Focus, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Focus, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2012 Ford Focus SE 2.0L 4 Cyl. Sedan
Did you know that heat is worse for your battery than cold? Replace it every 4 years2012 Ford Focus SE 2.0L 4 Cyl. Sedan
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2012 Ford Focus SE 2.0L 4 Cyl. Sedan
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2012 Ford Focus SE 2.0L 4 Cyl. Sedan
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2012 Ford Focus SE 2.0L 4 Cyl. Sedan
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2012 Ford Focus SE 2.0L 4 Cyl. Sedan