How to Add Coolant: 1989 Mazda 323 GLX 1.7L 4 Cyl. Diesel

Mazda 323 Model Years - 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995

How to check and refill coolant in the 1989 323 with step-by-step instruction to find the fill line on the reservoir

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1989 Mazda 323 GLX 1.7L 4 Cyl. Diesel Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

1989 Mazda 323 GLX 1.7L 4 Cyl. Diesel Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

1994 Mercury Tracer 1.9L 4 Cyl. Sedan Lights Center Brake Light (replace bulb)

Don't be the guy with your third brake light burnt out

1989 Mazda 323 GLX 1.7L 4 Cyl. Diesel Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Adding engine coolant (also known as antifreeze) to your 1989 Mazda 323 is pretty easy. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your 323 is located and how to add coolant / antifreeze. Be sure to check your owners manual to determine the correct type of fluid to add - for Mazdas, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant / antifreeze with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your 323. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your 323 for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20