How To Open Hood: 1993 Dodge Dynasty 2.5L 4 Cyl.

Dodge Dynasty Model Years - 1988, 1989, 1990, 1991, 1992, 1993

Open the Hood - Locate hood latches and open the hood

Car Displayed: 1996 Plymouth Breeze 2.0L 4 Cyl. info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1996 Dodge Stratus ES 2.4L 4 Cyl. Clock Set Clock

Is the clock in your car ahead or behind? Learn how to set it here!

1996 Plymouth Breeze 2.0L 4 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2003 Mitsubishi Colt GL 1.3L 4 Cyl. Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2003 Mitsubishi Colt GL 1.3L 4 Cyl. Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 1993 Dodge Dynasty. Popping the hood, or bonnet, on your Dynasty is a two step process, you need to release the hood latch inside your Dynasty and then you need to release the safety latch under your hood in the front of your Dynasty. The video above shows you the location of both hood latches.

Sometimes, the hood on Dodges gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Dynasty, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Dynasty with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Dynastys, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 1993 Dodge Dynasty is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20