David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows to check the coolant hoses in your 1994 Toyota 4Runner. The coolant hoses (radiator hoses) carry engine coolant through your engine and will eventually wear out. You can avoid getting stranded by identifying signs of extreme wear before they break. In 1994 4Runners with the 3.0 liter engine, coolant leaks are most likely to occur where the hoses connect to the engine, but it can also leak from the reservoir or from the hoses. Look for cracks in the hoses and analyze the brittleness or squishiness of the hoses in your 4Runner - if the hoses are hard to squeeze or squeeze very easily, it's time to replace them. The video above shows you where coolant hoses on your 1994 4Runner SR5 are located and the steps needed to analyze them.
Never attempt to replace a hose that is connected to your air conditioner - these hoses contain refrigerant that is under pressure and can blind you. AC problems are always best left to your professional mechanic.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!1994 Toyota 4Runner SR5 3.0L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb1994 Toyota 4Runner SR5 3.0L V6
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!1994 Toyota 4Runner SR5 3.0L V6
A few key tips will make jacking up your car much safer1994 Toyota 4Runner SR5 3.0L V6
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary1994 Toyota 4Runner SR5 3.0L V6
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber1994 Toyota 4Runner SR5 3.0L V6